Microsemi's SmartFusion™ Evaluation Kit offers a simple, low-cost way to try the world's only FPGA with hard ARM® Cortex™-M3 and programmable analog. The device contains on-chip flash and on-chip SRAM memory, as well as additional SPI flash memory. The board can communicate via Ethernet and HyperTerminal. The board also contains LEDs, switches, OLED and various voltage, current, and temperature monitoring functions for analog experimentation on the board.

The kit is supported by Libero® SoC, Microsemi's design software that includes SoftConsole Eclipse-based GNU software IDE. You can also use a free evaluation version or full licensed version of either Keil™ or IAR Systems® compilers. The quickstart card and the user's guide will walk you through the options for software, downloads, and licensing.

Web-based content includes user's guides, tutorials, design examples, and board documentation.

The SmartFusion Evaluation Kit board includes:

• A2F200M3F-FGG484
  • 200,000 System FPGA gates, 256 KB flash memory, 64 KB SRAM, and additional distributed SRAM in the FPGA fabric and external memory controller
  • Peripherals include Ethernet, DMAs, I²Cs, UARTs, timers, ADCs, DACs and additional analog resources
  • Refer to the SmartFusion product page for full device information
• SPI-flash memory connected to SPI_0 on the device
• USB connection for programming and debug from Microsemi's design tools
• USB to UART connection to UART_0 for HyperTerminal examples
• 10/100 Ethernet interface with on-chip MAC and external PHY
• RVI header for application programming and debug from either Keil or IAR Systems
• Mixed-signal header for daughter card support

User Inputs and Outputs

• OLED display with I²C interface connected to I2C_0 on the device
• First-order ΣΔ DAC (sigma delta) output with 12-bit 500 Ksps update rate
• Potentiometer used to vary voltage input for voltage and current monitoring
• 8 LEDs connected to the FPGA fabric for FPGA demonstration
• Jumpers for individual access to 4 out of 8 LEDs
• 2 user input switches connected through FPGA fabric
• Both LEDs and switches can be used with GPIO by connecting through the fabric
• Selector to choose between GNU SoftConsole or RVI-Header for debug
• Selector to switch between programming the device (fabric) and debug mode
• On-board 20 MHz crystal for system clock
• On-board 32.768 KHz for RTC
• 5 user I/Os for debug
• Access to header for unused I2C_1 peripheral
• Access to header for unused SPI_1 peripheral
• Access to header for unused UART_1 peripheral
• Access to VAREFOUT header
• Option to use internal 1.5 V regulator

To purchase a kit or inquire about additional information, please contact your local Microsemi Sales representative.

Part Number	Description	List Price
A2F-EVAL-KIT	SmartFusion Evaluation Kit	$99

  Buy Online: Avnet Memec WW Distributor, Digi-Key WW Distributor

User's Guides and Manuals

	SmartFusion Evaluation Kit Quickstart Card   Demo Design Programming File (ZIP, 108 KB, 1/12)		351 KB	1/2012	Click on the to rate this document
	SmartFusion Evaluation Kit User's Guide  Manufacturing Programming File (ZIP, 1.6 MB, 3/10)		6 MB	2/2012	Click on the to rate this document

	SmartFusion cSoC Webserver Demo Using uIP and FreeRTOS   Design files using Softconsole (ZIP, 17.2 MB, 1/12)  Design files using IAR (ZIP, 12.6 MB, 1/12) Design files using Keil (ZIP, 15.8 MB, 12/11)  Programming File (ZIP, 488 KB, 1/12)		3 MB	12/2011	Click on the to rate this document
	Mixed Signal Power Manager for SmartFusion User's Guide    MPM for SmartFusion GUI and Design Files Installer (ZIP, 6.41 MB, 7/11)		5 MB	9/2010	Click on the to rate this document
	RoweBots Unison Ultra Tiny Linux OS  Evaluation Files (ZIP, 10.4 MB, 8/10)		332 KB	8/2010	Click on the to rate this document
	SmartFusion Quickstart Guide for Micrium µC/OS-III Examples  Design Files (ZIP, 831 KB, 7/10)		1 MB	11/2011	Click on the to rate this document
	RoHS, WEEE, EMC Notification for Design Hardware and Software		222 KB	11/2011	Click on the to rate this document

Tutorials

NOTE : Please unzip design files in the root directory of C drive (i.e. C :\) using 7-Zip. If you need to unzip the design files in a non-root directory, you can refer to http://www.microsemi.com/soc/kb/article.aspx?id=KI8879

	Displaying POT Level with LEDs: Libero SoC and µVision4 IDE Flow Tutorial for SmartFusion cSoC   Design Files (ZIP, 16.6 MB, 11/11)  Programming Files (ZIP, 88.5 KB, 11/11)		2 MB	11/2011	Click on the to rate this document
	Displaying POT Level with LEDs: Libero SoC and IAR Embedded Workbench Flow Tutorial for SmartFusion cSoC   Design Files (ZIP, 14.9 MB, 12/11)  Programming Files (ZIP, 156 KB, 12/11)		1 MB	12/2011	Click on the to rate this document
	Displaying POT Level with LEDs: Libero SoC and SoftConsole Flow Tutorial for a SmartFusion cSoC   Design Files (ZIP, 17.5 MB, 11/11)  Programming Files (ZIP, 156 KB, 11/11)		1 MB	1/2012	Click on the to rate this document
	Displaying POT Values over UART SoftConsole Standalone Flow Tutorial for SmartFusion cSoC   Design Files (ZIP, 15.6 MB, 12/11)  Programming Files (ZIP, 145 KB, 12/11)		1 MB	12/2011	Click on the to rate this document
	SmartFusion cSoC: Building Executable Image in Release Mode and Loading into eNVM Tutorial		1 MB	11/2011	Click on the to rate this document
	Using Keil µVision and Microsemi SmartFusion  Programming File (ZIP, 91 KB, 7/10)		1 MB	1/2012	Click on the to rate this document
	Using UART with a SmartFusion cSoC Libero SoC and IAR Embedded Workbench Flow Tutorial   Design Files (ZIP, 9.4 MB, 12/11)  Programming Files (ZIP, 48.4 KB, 12/11)		1 MB	12/2011	Click on the to rate this document
	Using UART with a SmartFusion cSoC Libero SoC and SoftConsole Flow Tutorial   Design Files (ZIP, 20.5 MB, 12/11)  Programming Files (ZIP, 140 KB, 12/11)		1 MB	1/2012	Click on the to rate this document
	Using UART with SmartFusion cSoC: SoftConsole Standalone Flow Tutorial   Design Files (ZIP, 18.4 MB, 11/11)  Programming Files (ZIP, 140 KB, 11/11)		1 MB	11/2011	Click on the to rate this document

Board References

SmartFusion Evaluation Kit PCB Files  (includes Allegro, OrCAD, and Gerber files)

1/2012

Click on the to rate this document

Related Files

USB-UART Driver Files – Silicon Labs CP2102

5 MB

1/2012

Click on the to rate this document

Related Documentation

	CAN/CANbus and CAN Protocol Licensing		384 KB	8/2010	Click on the to rate this document
	FlashPro v9.1 User's Guide  (online, printable document)		4 MB	1/2011	Click on the to rate this document
	Installing IP Cores and Drivers User's Guide		311 KB	8/2010	Click on the to rate this document
	Libero IDE v9.1 User's Guide  (online, printable document)		5 MB	1/2011	Click on the to rate this document
	Microsemi Libero IDE Quick Start Guide & Tutorial  Libero Design Files (ZIP, 8.5 MB, 1/11)		5 MB	1/2011	Click on the to rate this document
	Microsemi SoftConsole v3.1 User's Guide		4 MB	3/2010	Click on the to rate this document

For SmartFusion-related documents, visit the SmartFusion Documentation page.